Leave Your Message
303 Series Thin‑Wall Self Tapping Thread Insert For Thin‑Wall Plastic & Light‑Alloy Housing
Self tapping thread insert
Products Categories
Featured Products

303 Series Thin‑Wall Self Tapping Thread Insert For Thin‑Wall Plastic & Light‑Alloy Housing

FH 303 series thin‑wall self‑tapping thread insert is slim‑wall variant of 302 series, double‑cutting‑slot design. Optimized for limited‑wall‑thickness plastic & light‑alloy parts. Build durable anti‑vibration internal thread for compact thin‑wall structural components。

    303 Series Thin‑Wall Self Tapping Thread Insert For Thin‑Wall Plastic & Light‑Alloy Housing

    FH 303 series thin‑wall self‑tapping thread insert is slim‑wall variant of 302 series, double‑cutting‑slot design. Optimized for limited‑wall‑thickness plastic & light‑alloy parts. Build durable anti‑vibration internal thread for compact thin‑wall structural components。

    Product Overview

    What is FH 303 Thin‑Wall Self‑Tapping Thread Insert

    FH 303 series thin‑wall self‑tapping threaded insert is thin‑walled version of well‑known 302 slotted self‑tapping insert, manufactured by Xinxiang Flight Fasteners (Zhonghang Feihang) with 20+‑year threaded insert expertise新乡市飞航...。

    Same dual cutting‑slot structure as 302 series, but smaller outer‑diameter & thinner wall thickness. It solves the pain point:workpiece wall thickness is insufficient to install standard 302 self‑tapping insert,widely used for injection‑molded plastic parts, thin‑wall die‑cast aluminum / magnesium alloy housings, laminate and thin hard‑wood components新乡市飞航...。

    Installation tip:For harder substrate materials, applying a small amount of lubricant during screwing‑in will reduce installation torque and avoid insert cracking risk。

    25081901-详情图1.jpg

    Difference: 303 VS 302 Series

    Item 303 Thin‑Wall Series 302 Standard Series
    Wall & Outer Dia Thinner wall, smaller outer diameter for limited wall space Standard thicker‑wall, larger outer diameter
    Best‑fit workpiece Thin‑wall plastic, thin‑wall magnesium/aluminum alloy, compact enclosure General‑thickness plastic, light alloy, cast iron, hardwood
    Mechanical property Suitable for medium load, space‑limited design Higher pull‑out strength for heavy‑load application
    Special note Lubrication recommended for hard material installation No lubricant required for most working conditions

    Core Advantages

    1. Perfect for thin‑wall compact design Smaller outer dimension, fits parts with very limited surrounding wall thickness; no need to enlarge boss diameter of plastic housing, help miniaturize end‑product structure.
    2. Dual cutting‑slot self‑tapping structure Built‑in cutting slots cut base material during screwing, form reliable bite‑in connection, good anti‑vibration performance for cyclic vibration scenarios.
    3. Strengthen soft thin substrate threads Prevent thread stripping on thin plastic / magnesium alloy housing, support repeated bolt disassembly & assembly.
    4. Simplify injection‑molding & die‑casting process No pre‑tapping operation required; only drill pre‑defined bottom hole then screw insert in, improve production yield for mass production.
    5. Repair stripped threads on thin‑wall components Restore standard internal thread without redesigning or scrapping thin‑wall housing parts.
    6. Multiple material & surface options Case‑hardened steel, stainless steel 304 / 303 / 316F, brass; RoHS compliant surface treatments for consumer electronics, automotive components.

    Complete 303 Series Product Range

    • 303‑0 Standard straight‑body thin‑wall self‑tapping insert:Basic model, metric & inch UNC/UNF thread, dual cutting slots.
    • 303‑2 Hex‑socket drive thin‑wall insert:Internal hex recess, install by hex bit / electric torque tool, easy removal for recycling parts.
    • 303‑1 Flanged shoulder thin‑wall insert:Circular locating shoulder, increase pull‑through force for stacked multi‑layer assembly.

    Technical Parameter Table

    Metric 303 Series Main Dimension(Unit:mm)

    Internal Thread A External Dia E Pitch P Length B Recommended Drill Hole L Min Blind Hole Depth T
    M3 4.5 0.5 6 4.2‑4.3 8
    M3.5 5 0.6 6 4.7‑4.8 8
    M4 6 0.7 6 5.5‑5.7 8
    M5 7 0.8 8 6.6‑6.7 10
    M6 8 1.0 10 7.5‑7.6 13
    M8 10 1.25 14 9.2‑9.4 15

    Custom lengths & special pitch sizes are available upon request.

    Material & Surface Finish (Suffix 3‑digit code for part‑number)

    Material & Surface Treatment Suffix Code Typical Application
    Case‑hardened steel, zinc‑plated blue passivated 110 General plastic & light alloy mass production
    Case‑hardened steel, zinc‑nickel transparent passivated 143 Automotive parts, high salt‑spray requirement
    Case‑hardened steel, zinc yellow chromate 160 Indoor general mechanical assembly
    SUS304 (14301) Stainless steel 400 Corrosion‑resistant equipment
    SUS303 (14305) Stainless steel 500 Instrument, precision electronics
    SUS316F (14401) Stainless steel 600 Marine & chemical environment
    Brass 800 Electrical contact assembly

    Thread & Dimensional Tolerance

    • Metric internal thread:ISO 6H;Custom aviation grade 5H available
    • External self‑tapping thread:FH factory internal standard
    • Overall dimension tolerance:ISO 2768‑m

    Installation Guide

    Method 1: Small‑batch Manual Installation

    1. Drill bottom hole strictly following recommended drill diameter table.
    2. Assemble matching bolt + nut, clamp 303 insert between bolt and nut.
    3. Screw whole assembly into pre‑drilled hole until insert surface is flush with workpiece face.
    4. Reverse bolt and withdraw, installation completed.

    Important note for 303 thin‑wall type: Do not apply excessive axial pressure during installation to avoid insert cracking. Apply lubricant if workpiece material is relatively hard.

    Method 2: Mass Automated Installation

    Use special hex‑drive installation tool with torque‑controlled electric / pneumatic screwdriver:

    1. Set depth stop: install insert 0.1‑0.2 mm below workpiece surface.
    2. Align cutting‑slot position with tool head, start clockwise rotation.
    3. Self‑tapping outer thread cuts substrate automatically. Stop when reaching preset depth.
    4. Trigger reverse rotation, retract installation tool.

    Application Industries

    ✅ Consumer Electronics & Household Appliance Thin‑wall injection‑molded plastic housing, wearable device shell, small home appliance enclosures, control panel.

    ✅ New Energy Automotive Components Thin‑wall magnesium / aluminum alloy housing for battery modules, interior plastic structural parts, lightweight sensor brackets.

    ✅ Communication 5G Equipment Thin‑wall die‑cast shielding shell, small‑size communication module, RF component.

    ✅ Precision Instrument & Medical Equipment Light‑weight instrument housing, thin laminate structural parts.

    ✅ General Machinery & Hardware Thin‑wall cast brass / bronze parts, thin hard‑wood furniture, thread repair for slim‑wall broken threads.

    ⚠️ Not recommended for high‑strength carbon steel base material. For high‑strength metal substrate please select FH 307 / 308 series self‑tapping insert.

    Manufacturer Strength (Flight Fasteners)

    1. Production capacity: 100+ automatic CNC machines, annual output >100 million pieces. Support standard stock & small‑batch non‑standard customization.
    2. R&D capability: 20+‑year threaded insert R&D experience, 47 national patents; Xinxiang Thread Fastener Engineering Technology Research Center.
    3. Certifications: ISO9001:2015, GJB9001C military quality system, RoHS / REACH / ELV SGS compliance reports.
    4. Global customer base: Supplying to Würth, Bossard, Gree, CRRC, new‑energy vehicle OEMs, exported to Europe, North America, Southeast Asia.

    Custom Service

    1. Non‑standard thread size, special overall length / shoulder height
    2. Special alloy: Inconel series, TC4 titanium alloy, Nitronic60
    3. Special coating: dry‑film lubrication, silver‑plating for electrical application
    4. Custom export‑oriented packaging, private label marking

    FAQ

    Q1:When should I pick 303 instead of 302? A:Choose 303 thin‑wall series when workpiece boss / wall thickness cannot accommodate standard 302 outer diameter. If wall space is sufficient and higher pull‑out strength is needed, select 302 standard series.

    Q2:Must I use lubricant for installing 303 inserts? A:For soft plastic & soft aluminum alloy, lubricant is optional. For harder light‑alloy material, lubricant is highly recommended to lower torque and prevent insert crack.

    Q3:What risk if drill hole size deviates from guideline value? A:Too small hole → high torque, risk of insert fracture; Too large hole → insufficient pull‑out force, loose connection. Please strictly follow our drill‑hole reference table.

    Q4:Can I get samples for performance testing? A:Free samples available, customer covers international freight cost.

    Q5:Lead‑time? A:Standard in‑stock items: 3‑7 working days; non‑standard customized parts: 10‑20 working days subject to order quantity。

    Leave Your Message